|
EMERGENCY FLASHER BUTTON
Buy - MK-3
Emergency flasher button replacement, matches all of our other products.
|
|
RADIO KNOB
Buy - MK-4
1/4 INCH SHAFT W/ SET SCREW
|
|
SWITCH KNOB
Buy - MK-5
3/16 INCH HOLE W/ SET SCREW
|
|
SWITCH KNOB
Buy - MK-6
1/4 INCH HOLE W/ SET SCREW
|
|
SHIFT LEVER KNOB
Buy - MK-7
GM W/ SET SCREW
May require trimming length of lever.
|
|
TURN SIGNAL LEVER
Buy - SL-5
COLUMNS W/O WIPER CONTROLS - w/ Button
Screw down mounting.
Dress Up Levers
Special turn signal and tilt lever handles for late GM steering columns that include our matching aluminum knobs with momentary push buttons in the ends. Use for horn buttons, headlight dimmer, flashing lights, etc. Stainless steel shafts with lead wire included. These low amperage switches require a relay for most applications.
|
|
TURN SIGNAL LEVER
Buy - SL-6
COLUMNS W/O WIPER CONTROLS - w/o Button
Screw down mounting.
Dress Up Levers
Special turn signal and tilt lever handles for late GM steering columns that include our matching aluminum knobs with momentary push buttons in the ends. Use for horn buttons, headlight dimmer, flashing lights, etc. Stainless steel shafts with lead wire included. These low amperage switches require a relay for most applications.
|
|
TURN SIGNAL LEVER
Buy - TL-2
TILT LEVER SCREW-IN MOUNTING - w/ Button
Dress Up Levers
Special turn signal and tilt lever handles for late GM steering columns that include our matching aluminum knobs with momentary push buttons in the ends. Use for horn buttons, headlight dimmer, flashing lights, etc. Stainless steel shafts with lead wire included. These low amperage switches require a relay for most applications.
|
|
TURN SIGNAL LEVER
Buy - TL-3
TILT LEVER SCREW-IN MOUNTING - w/o Button
Dress Up Levers
Special turn signal and tilt lever handles for late GM steering columns that include our matching aluminum knobs with momentary push buttons in the ends. Use for horn buttons, headlight dimmer, flashing lights, etc. Stainless steel shafts with lead wire included. These low amperage switches require a relay for most applications.
|
|
TURN SIGNAL LEVER
Buy - WL-3
PUSH-IN - w/ Button
Retains all functions of the original lever except washers and cruise control.
Dress Up Levers
Special turn signal and tilt lever handles for late GM steering columns that include our matching aluminum knobs with momentary push buttons in the ends. Use for horn buttons, headlight dimmer, flashing lights, etc. Stainless steel shafts with lead wire included. These low amperage switches require a relay for most applications.
|
|
TURN SIGNAL LEVER
Buy - WL-4
PUSH-IN - w/o Button
Retains all functions of the original lever except washers and cruise control.
Dress Up Levers
Special turn signal and tilt lever handles for late GM steering columns that include our matching aluminum knobs with momentary push buttons in the ends. Use for horn buttons, headlight dimmer, flashing lights, etc. Stainless steel shafts with lead wire included. These low amperage switches require a relay for most applications.
|
|
TURN SIGNAL LEVER
Buy - SL-7
SCREW-IN TYPE LEVER MOUNTING - w/ Button
Dress Up Levers
Special turn signal and tilt lever handles for late GM steering columns that include our matching aluminum knobs with momentary push buttons in the ends. Use for horn buttons, headlight dimmer, flashing lights, etc. Stainless steel shafts with lead wire included. These low amperage switches require a relay for most applications.
|
|
TURN SIGNAL LEVER
Buy - SL-8
SCREW-IN TYPE LEVER MOUNTING - w/o Button
Dress Up Levers
Special turn signal and tilt lever handles for late GM steering columns that include our matching aluminum knobs with momentary push buttons in the ends. Use for horn buttons, headlight dimmer, flashing lights, etc. Stainless steel shafts with lead wire included. These low amperage switches require a relay for most applications.
|
|
UNIVERSAL RELAY PACK
Buy - RP-1
UNIVERSAL ON/OFF CONTROL
Used in conjunction with the push button turn signal and tilt levers, these relays allow control of various electrical functions in the vehicle.
|
|
DIMMER SWITCH CONTROL RELAY
Buy - RP-3
PUT YOUR DIMMER SWITCH ON THE COLUMN
Used in conjunction with the push button turn signal and tilt levers, these relays allow control of various electrical functions in the vehicle.
|
|
DIMMER CONTINUOUS RELIEF RELAY
Buy - RP-4
USE W/ RP-3 IF USING HALOGEN HEADLIGHTS
Handles 30 amps.
Used in conjunction with the push button turn signal and tilt levers, these relays allow control of various electrical functions in the vehicle.
|
|
CRUISE CONTROL - ELECTRONIC/HIDDEN
Buy - CC-57
Uses & Includes our SL-5
FOR USE WITH ididit & OTHER AFTERMARKET COLUMNS, INCLUDING 1981 & EARLIER GM COLUMNS OR AMC JEEP CHRYSLER W/SAGINAW COLUMNS
Installing this kit allows the cruise control unit to be set using one of Ron Francis Wiring push button column dress-up levers or any momentary dash mounted push button type switch (or toggle or other brand of column lever mounted button). If you have always wanted cruise, but wanted to keep your steering column clean, this is the solution! Compatible with any momentary button, like those found on aftermarket steering column dress-up levers or a momentary button of your choice.
We worked with a popular, leading brand cruise control unit and adapted it to use with a ‘One-Touch Activation” Relay System. The CC-56 comes with the following features found on modern standard equipment models: on/off, speed set & coast.
This unit works with any 2000, 4000 or 8000 pulse-per mile pulse generator you supply. This electronic unit solves low vacuum situations caused by radical cams, etc. If the complexity of wiring cruise control in your ride has kept you from installing it in the past, you need wait no more!
|
|
CRUISE CONTROL - ELECTRONIC / HIDDEN
Buy - CC-58
Uses & Includes our WL-3
FOR 1984 - 93 GM COLUMNS w/o PULSE WIPERS
Installing this kit allows the cruise control unit to be set using one of Ron Francis Wiring push button column dress-up levers or any momentary dash mounted push button type switch (or toggle or other brand of column lever mounted button). If you have always wanted cruise, but wanted to keep your steering column clean, this is the solution! Compatible with any momentary button, like those found on aftermarket steering column dress-up levers or a momentary button of your choice.
We worked with a popular, leading brand cruise control unit and adapted it to use with a ‘One-Touch Activation” Relay System. The CC-56 comes with the following features found on modern standard equipment models: on/off, speed set & coast.
This unit works with any 2000, 4000 or 8000 pulse-per mile pulse generator you supply. This electronic unit solves low vacuum situations caused by radical cams, etc. If the complexity of wiring cruise control in your ride has kept you from installing it in the past, you need wait no more!
|
|
CRUISE CONTROL - ELECTRONIC/HIDDEN
Buy - CC-59
Uses & Includes our TL-2
FOR USE WITH SCREW-IN TILT LEVERS, LIKE THOSE FOUND ON ididit AND OTHER AFTER MARKET COLUMS, AS WELL AS MANY GM COLUMNS.
Installing this kit allows the cruise control unit to be set using one of Ron Francis Wiring push button column dress-up levers or any momentary dash mounted push button type switch (or toggle or other brand of column lever mounted button). If you have always wanted cruise, but wanted to keep your steering column clean, this is the solution! Compatible with any momentary button, like those found on aftermarket steering column dress-up levers or a momentary button of your choice.
We worked with a popular, leading brand cruise control unit and adapted it to use with a ‘One-Touch Activation” Relay System. The CC-56 comes with the following features found on modern standard equipment models: on/off, speed set & coast.
This unit works with any 2000, 4000 or 8000 pulse-per mile pulse generator you supply. This electronic unit solves low vacuum situations caused by radical cams, etc. If the complexity of wiring cruise control in your ride has kept you from installing it in the past, you need wait no more!
|
|
CRUISE CONTROL LEVER
Buy - CC-25
GM AMC JEEP CHRYSLER THROUGH 1981
w/ Saginaw Column
|
|
CRUISE CONTROL LEVER
Buy - CC-35
1984-93 GM w/o Pulse Wipers
Black
|
|
CRUISE CONTROL LEVER
Buy - CC-36
GM W/ DIMMER THROUGH 1981
|
|
CRUISE CONTROL PIGGY BACK
Buy - CC-37
CLAMPS TO EXISTING LEVER
|
|
CRUISE CONTROL DASH MOUNT
Buy - CC-38
LIGHTED/FLAT
|
|
CRUISE CONTROL LEVER
Buy - CC-39
GM/FORD TAPERED THREAD .325/.330
|
|
CRUISE CONTROL LEVER
Buy - CC-40
UNIVERSAL INSTALLS OVER EXISTING LEVER
|
|
CRUISE CONTROL PULSE GENERATOR
Buy - CC-75
|
|
MAGNET SPEED SENSOR
Buy - CC-76
ATTACHES TO DRIVE SHAFT
|
|
CRUISE CONTROL UNIT
Buy - CC-60
ELECTRONIC
If the complexity of wiring cruise control in your ride has kept you from installing it in the past, you need wait no more! We worked with a popular, leading brand cruise control unit and adapted it to plug into most GM steering column cruise switches and wire directly to our wiring panels. It comes with all the features found on modern standard equipment models: resume speed, coast and incremental acceleration. Works with pulse generator you supply, our CC-75 or CC-76. We also have full function turn signal levers available for your GM column, piggy-back or dash mounted switches. This electronic unit solves low vacuum situations caused by radical cams, etc.
|
|
WINDSHIELD WIPER MOTOR
Buy - WM-88
W/ BUILT-IN SWITCH
The scratch resistant mounting bracket is available in several model year applications. The soft rubber is molded to grip the top frame and glass without leaving a mark. The brackets accept most wiper motors and require drilling one anti-rotational mounting hole for the anti-rotational screw (included). Each kit contains the stainless steel supported rubber mold, screw, and male cigar lighter type plug to allow easy removal when the sun shines.
|
|
ACCESSORY POWER OUTLET
Buy - WR-73
FEMALE RECEPTACLE FOR DASH MOUNTING
The scratch resistant mounting bracket is available in several model year applications. The soft rubber is molded to grip the top frame and glass without leaving a mark. The brackets accept most wiper motors and require drilling one anti-rotational mounting hole for the anti-rotational screw (included). Each kit contains the stainless steel supported rubber mold, screw, and male cigar lighter type plug to allow easy removal when the sun shines.
|
|
WINDSHIELD WIPER BRACKET
Buy - WB-22
FITS 28-31 FORD FRAMES
The scratch resistant mounting bracket is available in several model year applications. The soft rubber is molded to grip the top frame and glass without leaving a mark. The brackets accept most wiper motors and require drilling one anti-rotational mounting hole for the anti-rotational screw (included). Each kit contains the stainless steel supported rubber mold, screw, and male cigar lighter type plug to allow easy removal when the sun shines.
|
|
WINDSHIELD WIPER BRACKET
Buy - WB-33
FITS 32-36 FORD FRAMES
The scratch resistant mounting bracket is available in several model year applications. The soft rubber is molded to grip the top frame and glass without leaving a mark. The brackets accept most wiper motors and require drilling one anti-rotational mounting hole for the anti-rotational screw (included). Each kit contains the stainless steel supported rubber mold, screw, and male cigar lighter type plug to allow easy removal when the sun shines.
|
|
WINDSHIELD WIPER BRACKET
Buy - WB-11
FITS ALL DUVAL FRAMES
The scratch resistant mounting bracket is available in several model year applications. The soft rubber is molded to grip the top frame and glass without leaving a mark. The brackets accept most wiper motors and require drilling one anti-rotational mounting hole for the anti-rotational screw (included). Each kit contains the stainless steel supported rubber mold, screw, and male cigar lighter type plug to allow easy removal when the sun shines.
|
|
WINDSHIELD WIPER BRACKET
Buy - WB-44
ACCEPTS GLASS ONLY
The scratch resistant mounting bracket is available in several model year applications. The soft rubber is molded to grip the top frame and glass without leaving a mark. The brackets accept most wiper motors and require drilling one anti-rotational mounting hole for the anti-rotational screw (included). Each kit contains the stainless steel supported rubber mold, screw, and male cigar lighter type plug to allow easy removal when the sun shines.
|
