|
INTERIOR LAMP
Buy - DL-39
DOME LIGHT
This light measures 3-7/8 inches in diameter and has a clean flush mount.
|
|
DIELECTRIC GREASE
Buy - DG-67
Add life to your bulbs with a dab of this grease in the bulb socket.
|
|
DOUBLE FILAMENT HEADLIGHT BULB
Buy - 1125
1928-1934, STRAIGHT LOCATING PINS
Super bright 12 volt bulbs replace 6 volt bulbs for street rods. These two styles were used until 1940 when sealed beams were introduced. Special 125-75 Candlepower with special wiring instructions for better and safer lighting than you ever dreamed possible. Focuses better than halogen conversion and is cheaper too! Fits stock and replacement sockets. If you're keeping the stock lens, you can't do better.
Old Candlepower: 32-32
Our Candlepower: 125-75
|
|
DOUBLE FILAMENT HEADLIGHT BULB
Buy - 2337
1935-1939, PRE-FOCUS RING LOCATING PINS
Super bright 12 volt bulbs replace 6 volt bulbs for street rods. These two styles were used until 1940 when sealed beams were introduced. Special 125-75 Candlepower with special wiring instructions for better and safer lighting than you ever dreamed possible. Focuses better than halogen conversion and is cheaper too! Fits stock and replacement sockets. If you're keeping the stock lens, you can't do better.
Old Candlepower: 32-32
Our Candlepower: 125-75
|
|
HEADLIGHT BRIGHTNER
Buy - BJ-2
These kits provide a brighter headlight for very little cost. Brighter is better!
Very important on all cars, especially when using Bright Bulbs in 1928-1939 vehicles.
Works with sealed beams also.
Helps any lamp, except aftermarket halogens.
|
|
HEADLIGHT SOCKET
Buy - HS-2337
1935-1939, TWIST-IN REPLACEMENT
Fits original reflectors perfectly. For use with 2337 Headlight Bulb.
|
|
HEADLIGHT SOCKET
Buy - HS-1125
1928-1934, REPLACEMENT W/ WASHER & NUT
Fits just about all applications. For use with 1125 Headlight Bulb. Bolt-in style allows for many kinds of conversions. Hole size .70.
|
|
DOUBLE FILAMENT BRITE BULB
Buy - 1077
STD GLOBE - STAGGERED LOCATING PINS
Use: Brake/Tail/Parking/Turn
Replaces: 1034, 1157, 2057
Auto Pts Candlepower: 32-3
Our Candlepower: 50-14
All our bulbs are specially designed by RON FRANCIS WIRING and are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
DOUBLE FILAMENT BRITE BULB
Buy - 1077A
STD GLOBE-STAGGERED LOCATING PINS-AMBER
Use: Brake/Tail/Parking/Turn
Replaces: 1157A, 2057A
Auto Pts Candlepower: 32-3
Our Candlepower: 50-14
All our bulbs are specially designed by RON FRANCIS WIRING and are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
DOUBLE FILAMENT BRITE BULB
Buy - 1087
STD GLOBE - STRAIGHT LOCATING PINS
Use: Brake/Tail/Parking/Turn
Replaces: 1176, 1158
Auto Pts Candlepower: 21-3
Our Candlepower: 50-14
All our bulbs are specially designed by RON FRANCIS WIRING and are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
DOUBLE FILAMENT BRITE BULB
Buy - 1005
SMALL GLOBE - STRAIGHT LOCATING PINS
Use: Parking/Turn/Conversions
Replaces: N/A
Auto Pts Candlepower: N/A
Our Candlepower: 15-3
All our bulbs are specially designed by RON FRANCIS WIRING and are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING. Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
DOUBLE FILAMENT BRITE BULB
Buy - 1005A
SMALL GLOBE-STRAIGHT LOCATING PIN-AMBER
Use: Parking/Turn/Conversions
Replaces: N/A
Auto Pts Candlepower: N/A
Our Candlepower: 15-3
All our bulbs are specially designed by RON FRANCIS WIRING and are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING. Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
DOUBLE FILAMENT BRITE BULB
Buy - 1007
SMALL GLOBE - STAGGERED LOCATING PINS
Use: Parking/Turn/Conversions
Replaces: N/A
Auto Pts Candlepower: 6-3
Our Candlepower: 15-3
All our bulbs are specially designed by RON FRANCIS WIRING and are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING. Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
DOUBLE FILAMENT BRITE BULB
Buy - 1007A
SMALL GLOBE-STAGGERED LOCATINGPIN-AMBER
Use: Parking/Turn/Conversions
Replaces: N/A
Auto Pts Candlepower: 6-3
Our Candlepower: 15-3
All our bulbs are specially designed by RON FRANCIS WIRING and are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING. Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
SINGLE FILAMENT BRITE BULB
Buy - 1010
STD GLOBE - 32 CANDLEPOWER
Use: Separate Taillights or parking lights
Locating Pins: Straight
Replaces: 67 or 89
Auto Pts Candlepower: 3
Our Candlepower: 32
All our bulbs are specially designed by RON FRANCIS WIRING and are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING. Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
SINGLE FILAMENT BRITE BULB
Buy - 1015
SMALL GLOBE - 50 CANDLEPOWER
Use: 1156, 1073, 1141
Locating Pins: Straight
Replaces: 1141, 1073, 1156
Auto Pts Candlepower: 21
Our Candlepower: 50
All our bulbs are specially designed by RON FRANCIS WIRINGand are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
SINGLE FILAMENT BRITE BULB
Buy - 1016
SMALL GLOBE - 3 CANDLEPOWER
Use: Universal
Locating Pins: Straight
Replaces: 53
Auto Pts Candlepower: 1
Our Candlepower: 3
All our bulbs are specially designed by RON FRANCIS WIRING and are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
SINGLE FILAMENT BRITE BULB
Buy - 1018
SMALL GLOBE - 2 CANDLEPOWER
Use: Dash Gauges
Locating Pins: Straight
Replaces: 53
Auto Pts Candlepower: 1
Our Candlepower: 2
All our bulbs are specially designed by RON FRANCIS WIRING and are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
SINGLE FILAMENT BRITE BULB
Buy - 1004
SMALL GLOBE - NON-GROUNDING INTERIOR
Use: Dome Lights Only
Locating Pins: Straight
Replaces: 1004
Non Grounding Interior Lights Only
All our bulbs are specially designed by RON FRANCIS WIRING and are sold only by us and our dealers. They are not available at your local auto parts store. For this reason, you may want to consider a spare. We can ship replacements quickly, but shipping costs are expensive.
These bulbs may not be legal in some states and the user shall need to determine this before purchasing or using the bulbs. Bulbs in this section are warranteed for one year from the date of purchase. Return defective bulb to us for inspection and replacement. DO NOT return to our dealers. All RON FRANCIS WIRING bulbs are model and date coded. All bulb part numbers are trademarks of RON FRANCIS WIRING. Beware of counterfeit bulbs sold as our products.
These bulbs produce slightly more heat when enclosed in a small housing that may shorten bulb life. Vibration and high alternator voltages have a major effect on bulb life too. Loose fitting sockets are usually the cause for the same bulb burning out often. Average life is about the same as an 1176 bulb.
Our bulbs will not overload a brake or turn signal switch.
Add life to your bulbs with a dab of Dielectric Grease in your sockets! Order part number DG-67.
|
|
BILLET ALUMINUM SOCKET
Buy - TR-11
SINGLE FILAMENT/STRAIGHT PINS
Weather protection boot, 15 inches long. Ideal for 1955 and newer Chevy's as well as step side pickups!
Hole Size .75
Typically uses 1156 & 1015 bulbs.
|
|
BILLET ALUMINUM SOCKET
Buy - TR-33
DOUBLE FILAMENT/STAGGERED PINS
Weather protection boot, 15 inches long. Ideal for 1955 and newer Chevy's as well as step side pickups!
Hole Size .75
Typically uses 1157 & 1077 bulbs.
|
|
BILLET ALUMINUM SOCKET
Buy - RR-11
SINGLE FILAMENT/STRAIGHT PINS
With oversized flange to cover existing original socket hole. Large aluminum nut to make installation easier.
Hole Size .75
Typically uses 1156 & 1015 bulbs.
|
|
BILLET ALUMINUM SOCKET
Buy - RR-33
DOUBLE FILAMENT/STAGGERED PINS
With oversized flange to cover existing original socket hole. Large aluminum nut to make installation easier.
Hole Size .75
Typically uses 1157 & 1077 bulbs.
|
|
UNIVERSAL DOUBLE CONTACT SOCKET
Buy - PL-19
FOR UNLIMITED CONVERSIONS
Double Contact, Staggered Pin, flange is removable.
Uses our brite bulb #'s 1077, 1077A, 1007 & 1007A.
Hole Size .75
|
|
WATERTIGHT SOCKET
Buy - PL-40
Watertight with rubber boot for bayonet double filament connections. Straight pin configuration. Perfect for 1005 bulb in tight places (for 40 Ford Parking Lights). Also fits our brite bulb #'s 1087, 1005 & 1005A.
Hole Size .75
|
|
SOCKET REPAIR PARTS
Buy - PT-18
FOR DOUBLE CONTACT SOCKETS
May be used to convert single socket to double. Requires special bulbs like our 1005, 1087 or 1005A with straight across pins.
|
|
SOCKET REPAIR WASHER SET
Buy - PT-10
FOR SINGLE CONTACT SOCKETS
|
|
PLASTIC SOCKET
Buy - PL-01
FULLY INSULATED W/ GROUND WIRE
Single filament, straight pin. For dash light bulbs, especially for fiberglass or wood panels. Uses our #'s 1016, 1018 & #57 bulbs.
|
|
SELF GROUNDING SOCKET
Buy - PL-02
FOR USE ON DASH BOARDS, ETC.
Single filament, straight pin. Uses our #'s 1016, 1018 & #57 bulbs.
|
|
SINGLE CONTACT SOCKET
Buy - PL-41
WATER RESISTANT COVERING ON END
Single filament, single contact, straight pin. Uses our #'s 1015, 1010 & 1006 bulbs.
|
|
LED LIGHT
Buy - TD-5
10 INCH RED - LIGHT ONLY
Approximate Cut Out: 10 inch x 5/8 inch
|
|
LAMP & PLATE LED
Buy - TD-24
10 INCH RED - WELD OR FIBERGLASS
Approximate Cut Out: 1-1/8 inch x 11 inch
|
|
LED ELECTRONIC MODULE
Buy - TD-89
TO USE 10 IN. LED'S FOR TAIL,TURN&BRAKE
|
|
NO-LOAD ELECTRONIC TURN SIGNAL FLASHER
Buy - EL-39
LED FLASHER
Here we have a more economical turn signal flasher for use with LED lights in the front or rear of your car or truck without aggravation. This unit can flash your LED’s or combination of incandescent bulbs. Should not be used with vehicles operating more than normal lamps like trailers or extra incandescent bulbs. Most LED flashers can't handle regular bulbs. Regular flashers don't work with LED lamps because the LED's don't draw enough power to make the flasher oscillate.
|
|
INDICATOR LIGHT
Buy - DR-16
12 VOLT - .161 INCH HOLE SIZE - Red
Small L.E.D.s w/ Black Bezel & 6 inch Wire Leads.
Use #19 Drill bit for proper installation.
|
|
INDICATOR LIGHT
Buy - DA-16
12 VOLT - .161 INCH HOLE SIZE - Amber
Small L.E.D.s w/ Black Bezel & 6 inch Wire Leads.
Use #19 Drill bit for proper installation.
|
|
INDICATOR LIGHT
Buy - DG-16
12 VOLT - .161 INCH HOLE SIZE - Green
Small L.E.D.s w/ Black Bezel & 6 inch Wire Leads.
Use #19 Drill bit for proper installation.
|
|
INDICATOR LIGHT
Buy - DB-16
12 VOLT - .161 INCH HOLE SIZE - Blue
Small L.E.D.s w/ Black Bezel & 6 inch Wire Leads.
Use #19 Drill bit for proper installation.
|
|
INDICATOR LIGHT
Buy - DR-32
12 VOLT - 5/16 INCH HOLE SIZE - Red
Medium Indicator Lights w/ Chrome Bezel.
|
|
INDICATOR LIGHT
Buy - DA-32
12 VOLT - 5/16 INCH HOLE SIZE - Amber
Medium Indicator Lights w/ Chrome Bezel.
|
|
INDICATOR LIGHT
Buy - DG-32
12 VOLT - 5/16 INCH HOLE SIZE - Green
Medium Indicator Lights w/ Chrome Bezel.
|
|
INDICATOR LIGHT
Buy - DB-32
12 VOLT - 5/16 INCH HOLE SIZE - Blue
Medium Indicator Lights w/ Chrome Bezel.
|
|
INDICATOR LIGHT
Buy - DR-50
12 VOLT - 1/2 INCH HOLE SIZE - Red
Large Indicator Lights w/ Chrome Bezel.
|
|
INDICATOR LIGHT
Buy - DA-50
12 VOLT - 1/2 INCH HOLE SIZE - Amber
Large Indicator Lights w/ Chrome Bezel.
|
|
INDICATOR LIGHT
Buy - DG-50
12 VOLT - 1/2 INCH HOLE SIZE - Green
Large Indicator Lights w/ Chrome Bezel.
|
|
INDICATOR LIGHT
Buy - DB-50
12 VOLT - 1/2 INCH HOLE SIZE - Blue
Large Indicator Lights w/ Chrome Bezel.
|
|
TURN, TAIL & BRAKE LED
Buy - TD-1A
4 INCH SINGLE - Amber
Approximate Cut Out: 5-1/4 inch x 1 inch
|
|
TURN, TAIL & BRAKE LED
Buy - TD-1R
4 INCH SINGLE - Red
Approximate Cut Out: 5-1/4 inch x 1 inch
|
|
TURN, TAIL & BRAKE LED
Buy - TD-2A
4 INCH DOUBLE - Amber
Approximate Cut Out: 5-1/4 inch x 1-3/4 inch
|
|
TURN, TAIL & BRAKE LED
Buy - TD-2R
4 INCH DOUBLE - Red
Approximate Cut Out: 5-1/4 inch x 1-3/4 inch
|
|
LED LIGHT
Buy - TD-4A
4 INCH - LIGHT ONLY - Amber
|
|
LED LIGHT
Buy - TD-4R
4 INCH - LIGHT ONLY - Red
|
|
REAR WINDOW 3RD BRAKE LIGHT
Buy - RW-14
10 INCH CURVED
If your car is finished and you want to add a brite high mount brake light, here is the answer! Ron Francis has developed this light for you personally. The window LED bonds to the inside of the rear window in an attractive black plastic case, ideal for painting interior color if desired. The small wires can be hidden in the window trim.
The lights are available in four inch and ten inch lengths and three different angles. We have a straight for flat windows like early cars and pick-up trucks. We also have a fifteen degree unit for sloped back windows like fat fendered cars and then we have a thirty degree unit for radical chopped tops and customs. All three models have slight adjustment to allow you to aim the LED's as horizontal as possible. Split rear window? Use two four inch lamps.
*Super Bright for Safety
*A Size and Angle to Fit any Car
*Easy Installation
1940-57 GM Coupes & Sedans
1941-1948 Ford Coupes & Sedans
|
|
REAR WINDOW 3RD BRAKE LIGHT
Buy - RW-43
4 INCH - Straight
If your car is finished and you want to add a brite high mount brake light, here is the answer! Ron Francis has developed this light for you personally. The window LED bonds to the inside of the rear window in an attractive black plastic case, ideal for painting interior color if desired. The small wires can be hidden in the window trim.
The lights are available in four inch and ten inch lengths and three different angles. We have a straight for flat windows like early cars and pick-up trucks. We also have a fifteen degree unit for sloped back windows like fat fendered cars and then we have a thirty degree unit for radical chopped tops and customs. All three models have slight adjustment to allow you to aim the LED's as horizontal as possible. Split rear window? Use two four inch lamps.
*Super Bright for Safety
*A Size and Angle to Fit any Car
*Easy Installation
|
|
REAR WINDOW 3RD BRAKE LIGHT
Buy - RW-41
4 INCH - 15 Degree
If your car is finished and you want to add a brite high mount brake light, here is the answer! Ron Francis has developed this light for you personally. The window LED bonds to the inside of the rear window in an attractive black plastic case, ideal for painting interior color if desired. The small wires can be hidden in the window trim.
The lights are available in four inch and ten inch lengths and three different angles. We have a straight for flat windows like early cars and pick-up trucks. We also have a fifteen degree unit for sloped back windows like fat fendered cars and then we have a thirty degree unit for radical chopped tops and customs. All three models have slight adjustment to allow you to aim the LED's as horizontal as possible. Split rear window? Use two four inch lamps.
*Super Bright for Safety
*A Size and Angle to Fit any Car
*Easy Installation
|
|
REAR WINDOW 3RD BRAKE LIGHT
Buy - RW-42
4 INCH - 30 Degree
If your car is finished and you want to add a brite high mount brake light, here is the answer! Ron Francis has developed this light for you personally. The window LED bonds to the inside of the rear window in an attractive black plastic case, ideal for painting interior color if desired. The small wires can be hidden in the window trim.
The lights are available in four inch and ten inch lengths and three different angles. We have a straight for flat windows like early cars and pick-up trucks. We also have a fifteen degree unit for sloped back windows like fat fendered cars and then we have a thirty degree unit for radical chopped tops and customs. All three models have slight adjustment to allow you to aim the LED's as horizontal as possible. Split rear window? Use two four inch lamps.
*Super Bright for Safety
*A Size and Angle to Fit any Car
*Easy Installation
|
|
REAR WINDOW 3RD BRAKE LIGHT
Buy - RW-13
10 INCH - Straight
If your car is finished and you want to add a brite high mount brake light, here is the answer! Ron Francis has developed this light for you personally. The window LED bonds to the inside of the rear window in an attractive black plastic case, ideal for painting interior color if desired. The small wires can be hidden in the window trim.
The lights are available in four inch and ten inch lengths and three different angles. We have a straight for flat windows like early cars and pick-up trucks. We also have a fifteen degree unit for sloped back windows like fat fendered cars and then we have a thirty degree unit for radical chopped tops and customs. All three models have slight adjustment to allow you to aim the LED's as horizontal as possible. Split rear window? Use two four inch lamps.
*Super Bright for Safety
*A Size and Angle to Fit any Car
*Easy Installation
|
|
REAR WINDOW 3RD BRAKE LIGHT
Buy - RW-11
10 INCH - 15 Degree
If your car is finished and you want to add a brite high mount brake light, here is the answer! Ron Francis has developed this light for you personally. The window LED bonds to the inside of the rear window in an attractive black plastic case, ideal for painting interior color if desired. The small wires can be hidden in the window trim.
The lights are available in four inch and ten inch lengths and three different angles. We have a straight for flat windows like early cars and pick-up trucks. We also have a fifteen degree unit for sloped back windows like fat fendered cars and then we have a thirty degree unit for radical chopped tops and customs. All three models have slight adjustment to allow you to aim the LED's as horizontal as possible. Split rear window? Use two four inch lamps.
*Super Bright for Safety
*A Size and Angle to Fit any Car
*Easy Installation
|
|
REAR WINDOW 3RD BRAKE LIGHT
Buy - RW-12
10 INCH - 30 Degree
If your car is finished and you want to add a brite high mount brake light, here is the answer! Ron Francis has developed this light for you personally. The window LED bonds to the inside of the rear window in an attractive black plastic case, ideal for painting interior color if desired. The small wires can be hidden in the window trim.
The lights are available in four inch and ten inch lengths and three different angles. We have a straight for flat windows like early cars and pick-up trucks. We also have a fifteen degree unit for sloped back windows like fat fendered cars and then we have a thirty degree unit for radical chopped tops and customs. All three models have slight adjustment to allow you to aim the LED's as horizontal as possible. Split rear window? Use two four inch lamps.
*Super Bright for Safety
*A Size and Angle to Fit any Car
*Easy Installation
|
|
BRITE LITE
Buy - LC-61
MAXI BULLET - Amber
Four Styles of Brite Lites
All are beautifully machined aluminum finished in chrome and all are double filament!
1. Maxi Bullet: The large bullet is approximately 2-1/4 inch in diameter, similar to the old style motorcycle lights. The #1005 double filament bulbs can be replaced without removing lenses. 7/16 inch mounting stud w/ nut.
2. Original Bullet: Approximately 1-5/8 inch diameter body comes with a jeweled lens and has a 7/16 inch mounting stud. Uses #1005 bulb.
3. Rounded End: This old favorite uses the same lens as the original bullet style 1-1/2 inch diameter body and has 7/16 inch mounting stud. Uses #1005 bulb.
4. Mini Bullet: These neat mini indicators have a variety of uses. The outside diameter is 3/4 inch with a 1/2 inch diameter on the stainless steel bezel. Mounting stud is 3/8 inch.
|
|
BRITE LITE
Buy - LC-62
MAXI BULLET - Red
Four Styles of Brite Lites
All are beautifully machined aluminum finished in chrome and all are double filament!
1. Maxi Bullet: The large bullet is approximately 2-1/4 inch in diameter, similar to the old style motorcycle lights. The #1005 double filament bulbs can be replaced without removing lenses. 7/16 inch mounting stud w/ nut.
2. Original Bullet: Approximately 1-5/8 inch diameter body comes with a jeweled lens and has a 7/16 inch mounting stud. Uses #1005 bulb.
3. Rounded End: This old favorite uses the same lens as the original bullet style 1-1/2 inch diameter body and has 7/16 inch mounting stud. Uses #1005 bulb.
4. Mini Bullet: These neat mini indicators have a variety of uses. The outside diameter is 3/4 inch with a 1/2 inch diameter on the stainless steel bezel. Mounting stud is 3/8 inch.
|
|
BRITE LITE
Buy - LC-63
MAXI BULLET - Clear
Four Styles of Brite Lites
All are beautifully machined aluminum finished in chrome and all are double filament!
1. Maxi Bullet: The large bullet is approximately 2-1/4 inch in diameter, similar to the old style motorcycle lights. The #1005 double filament bulbs can be replaced without removing lenses. 7/16 inch mounting stud w/ nut.
2. Original Bullet: Approximately 1-5/8 inch diameter body comes with a jeweled lens and has a 7/16 inch mounting stud. Uses #1005 bulb.
3. Rounded End: This old favorite uses the same lens as the original bullet style 1-1/2 inch diameter body and has 7/16 inch mounting stud. Uses #1005 bulb.
4. Mini Bullet: These neat mini indicators have a variety of uses. The outside diameter is 3/4 inch with a 1/2 inch diameter on the stainless steel bezel. Mounting stud is 3/8 inch.
|
|
BRITE LITE
Buy - MC-61
ORIGINAL BULLET - Amber
Four Styles of Brite Lites
All are beautifully machined aluminum finished in chrome and all are double filament!
1. Maxi Bullet: The large bullet is approximately 2-1/4 inch in diameter, similar to the old style motorcycle lights. The #1005 double filament bulbs can be replaced without removing lenses. 7/16 inch mounting stud w/ nut.
2. Original Bullet: Approximately 1-5/8 inch diameter body comes with a jeweled lens and has a 7/16 inch mounting stud. Uses #1005 bulb.
3. Rounded End: This old favorite uses the same lens as the original bullet style 1-1/2 inch diameter body and has 7/16 inch mounting stud. Uses #1005 bulb.
4. Mini Bullet: These neat mini indicators have a variety of uses. The outside diameter is 3/4 inch with a 1/2 inch diameter on the stainless steel bezel. Mounting stud is 3/8 inch.
|
|
BRITE LITE
Buy - MC-62
ORIGINAL BULLET - Red
Four Styles of Brite Lites
All are beautifully machined aluminum finished in chrome and all are double filament!
1. Maxi Bullet: The large bullet is approximately 2-1/4 inch in diameter, similar to the old style motorcycle lights. The #1005 double filament bulbs can be replaced without removing lenses. 7/16 inch mounting stud w/ nut.
2. Original Bullet: Approximately 1-5/8 inch diameter body comes with a jeweled lens and has a 7/16 inch mounting stud. Uses #1005 bulb.
3. Rounded End: This old favorite uses the same lens as the original bullet style 1-1/2 inch diameter body and has 7/16 inch mounting stud. Uses #1005 bulb.
4. Mini Bullet: These neat mini indicators have a variety of uses. The outside diameter is 3/4 inch with a 1/2 inch diameter on the stainless steel bezel. Mounting stud is 3/8 inch.
|
|
BRITE LITE
Buy - BC-61
ROUNDED END - Amber
Four Styles of Brite Lites
All are beautifully machined aluminum finished in chrome and all are double filament!
1. Maxi Bullet: The large bullet is approximately 2-1/4 inch in diameter, similar to the old style motorcycle lights. The #1005 double filament bulbs can be replaced without removing lenses. 7/16 inch mounting stud w/ nut.
2. Original Bullet: Approximately 1-5/8 inch diameter body comes with a jeweled lens and has a 7/16 inch mounting stud. Uses #1005 bulb.
3. Rounded End: This old favorite uses the same lens as the original bullet style 1-1/2 inch diameter body and has 7/16 inch mounting stud. Uses #1005 bulb.
4. Mini Bullet: These neat mini indicators have a variety of uses. The outside diameter is 3/4 inch with a 1/2 inch diameter on the stainless steel bezel. Mounting stud is 3/8 inch.
|
|
BRITE LITE
Buy - BC-62
ROUNDED END - Red
Four Styles of Brite Lites
All are beautifully machined aluminum finished in chrome and all are double filament!
1. Maxi Bullet: The large bullet is approximately 2-1/4 inch in diameter, similar to the old style motorcycle lights. The #1005 double filament bulbs can be replaced without removing lenses. 7/16 inch mounting stud w/ nut.
2. Original Bullet: Approximately 1-5/8 inch diameter body comes with a jeweled lens and has a 7/16 inch mounting stud. Uses #1005 bulb.
3. Rounded End: This old favorite uses the same lens as the original bullet style 1-1/2 inch diameter body and has 7/16 inch mounting stud. Uses #1005 bulb.
4. Mini Bullet: These neat mini indicators have a variety of uses. The outside diameter is 3/4 inch with a 1/2 inch diameter on the stainless steel bezel. Mounting stud is 3/8 inch.
|
|
BRITE LITE
Buy - SC-61
MINI BULLET - Amber
Four Styles of Brite Lites
All are beautifully machined aluminum finished in chrome and all are double filament!
1. Maxi Bullet: The large bullet is approximately 2-1/4 inch in diameter, similar to the old style motorcycle lights. The #1005 double filament bulbs can be replaced without removing lenses. 7/16 inch mounting stud w/ nut.
2. Original Bullet: Approximately 1-5/8 inch diameter body comes with a jeweled lens and has a 7/16 inch mounting stud. Uses #1005 bulb.
3. Rounded End: This old favorite uses the same lens as the original bullet style 1-1/2 inch diameter body and has 7/16 inch mounting stud. Uses #1005 bulb.
4. Mini Bullet: These neat mini indicators have a variety of uses. The outside diameter is 3/4 inch with a 1/2 inch diameter on the stainless steel bezel. Mounting stud is 3/8 inch.
|
|
BRITE LITE
Buy - SC-62
MINI BULLET - Red
Four Styles of Brite Lites
All are beautifully machined aluminum finished in chrome and all are double filament!
1. Maxi Bullet: The large bullet is approximately 2-1/4 inch in diameter, similar to the old style motorcycle lights. The #1005 double filament bulbs can be replaced without removing lenses. 7/16 inch mounting stud w/ nut.
2. Original Bullet: Approximately 1-5/8 inch diameter body comes with a jeweled lens and has a 7/16 inch mounting stud. Uses #1005 bulb.
3. Rounded End: This old favorite uses the same lens as the original bullet style 1-1/2 inch diameter body and has 7/16 inch mounting stud. Uses #1005 bulb.
4. Mini Bullet: These neat mini indicators have a variety of uses. The outside diameter is 3/4 inch with a 1/2 inch diameter on the stainless steel bezel. Mounting stud is 3/8 inch.
|
|
BRITE LITE
Buy - BL-69A
FLUSH MOUNT -CHROME - Amber
Uses jeweled lens. Use to mount flush in body panels. Hole size is 7/8 inch.
|
|
BRITE LITE
Buy - BL-69R
FLUSH MOUNT -CHROME - Red
Uses jeweled lens. Use to mount flush in body panels. Hole size is 7/8 inch.
|
