Related to Headlights-Ron Francis Wiring

DOUBLE FILAMENT HEADLIGHT BULBS - BRITE BULBS

Super bright 12 volt bulbs replace 6 volt bulbs for street rods. This style was used from 1928 ro 1934 (Sealed beams were introduced in 1940). These are special 125-75 candlepower with special wiring instructions for better and safer lighting than you ever dreamed possible.

These focus better than a halogen conversion, and are cheaper too! Fis stock and replacement sockets with straight pins. If you're keeping the stock lens, you can't do better!

$13.95

B-2337

2337 Bulb 175/75 Cp

DOUBLE FILAMENT HEADLIGHT BULBS - BRITE BULBS

Super bright 12 volt bulbs replace 6 volt bulbs for street rods. This style was used from 1935 ro 1939 (Sealed beams were introduced in 1940). These are special 125-75 candlepower with special wiring instructions for better and safer lighting than you ever dreamed possible.

These focus better than a halogen conversion, and are cheaper too! Fis stock and replacement sockets with the pre-focus ring. If you're keeping the stock lens, you can't do better!

$13.95

BJ-2

Headlight Brightener Floor

IF you already have regular 12v sealed beams or our Brite Bulbs, you would use this kit. The BJ-2 is pluged into the dimmer switch circuit. It keeps the low beams on all the time with the high beams, thus providing light at a distance and up close at the same time. The low beams work normally.

$14.95

HL-03

Headlight Switch

Standard Full Function Switch This switch includes dome light or interior light circuit, headlights, running lights and dimmer for dash lights. There is a built in circuit breaker for headlights. Knob / Shaft combination, plain octagon bezel, shaft with attractive aluminum knob, connector plug, contacts and complete diagram of all connections included. This switch is highly recommended over the old universal headlight switches that can’t handle modern bulbs safely. Requires a .435” mounting hole.

$37.95

HL-06

HDLT Sw w/BI Dim Sw

HEADLIGHT SWITCH WITH BUILT-IN DIMMER SWITCH When the knob is pushed in, the switch is off. Pull the knob out one position, and the park & tail lights are on. Pull the knob out one more position and the low beams and tail lights are on. Pull the knob out all the way and the tail lights and high beams are on. Requires external circuit protection. Complete instructions included. Requires a 7/16" mounting hole. Factory bezel and knob.

$25.95

HL-07

SYNERGY SERIES: Headlight Switch

Standard Full Function Switch Includes polished bezel and Accent Ring. This switch includes dome light or interior light circuit, headlights, running lights and dimmer for dash lights. There is a built in circuit breaker for headlights. Knob / Shaft combination, Synergy SeriesTM Bezel and Accent Rings, connector plug, contacts and complete diagram of all connections included. This switch is highly recommended over the old universal headlight switches that can't handle modern bulbs safely. Requires a .435" mounting hole.

$39.95

HL-08

CLASSIC SERIES: Headlight Switch

Standard Full Function Switch Includes CLASSIC SERIES polished knob, bezel and Accent Rings. This switch includes dome light or interior light circuit, headlights, running lights and dimmer for dash lights. There is a built in circuit breaker for headlights. Knob / Shaft combination, Classic Series Bezel and Accent Rings, connector plug, contacts and complete diagram of all connections included. This switch is highly recommended over the old universal headlight switches that can't handle modern bulbs safely. Requires a .435" mounting hole.

$39.95

HL-16

SYNERGY SERIES: Headlight Switch

Includes Hi-Low Dimmer Feature Includes polished bezel and Accent Ring. When the knob is pushed in, the switch is off. Pull the knob out one position, and the park & tail lights are on. Pull the knob out one more position and the low beams and tail lights are on. Pull the knob out all the way and the tail lights and high beams are on. Requires external circuit protection. Complete instructions included. Requires a 7/16" mounting hole. Includes matching Knob, Bezel & Accent Ring.

$36.95

HL-16C

CLASSIC SERIES: Headlight Switch

$36.95

HR-56

HALOGEN HEADLIGHT RELIEF RELAY

YOU MUST HAVE THIS WITH HIGH INTENSITY HALOGEN HEADLIGHTS!
The relief relay removes the high amp load created by "aftermarket" type halogen bulbs from the head light switch. The load is then placed on this high amp relay protecting the switch from premature failure. This product is normally not needed on vehicles with halogen or incandescent bulbs drawing less than 15 amps. Installation is as simple as plugging in the wiring connectors. All color codes and connectors match RON FRANCIS WIRING kits.

$45.95

HR-58

Halogen Headlights Relay Kit (2 Relays)

Two relays to take the load off the headlight switch for brighter lights and more voltage to them. All wiring is included - including sockets as shown.

$52.95

HS-1125

Headlight Socket ('28-'34)

Fits the original '28 to '34 reflector perfectly!

$20.95

HS-2337

Headlight Socket (35-39)

Fits the original '35 to '39 refelctor perfectly!

$19.95

SB-20

Sealed Beam Socket Kit

Great for flip up front ends!This kit contains two sealed beam sockets with color coded lead wires that match our harness. These leads are long enough to reach the inner fender panels where you mount these small terminal blocks. There is room for parking, turn signal & headlight wires on the same block. Sealed beam sockets are included in our wiring kits so this item is not necessary when you have our kit, but is a voluntary upgrade for special needs.

$29.95

SB-5

Seal Beam Headlight Connector

$5.95

Page 1 | 2