|
COLORED PUSH BUTTON STARTER SWITCH
Buy - PB-12
Keyless starts
Comes with Red, Blue & Clear lenses and optional mounting bracket. Use for keyless starts. Includes relay and can be used for many other uses. Uses 1-5/16" mounting hole. |
|
PUSH BUTTON SWITCH
Buy - PB-10
Attractive Starter Button
Super nice starter button for the early model cars and trucks still using the original style push to start switches. Comes with double contacts to fit ALL applications. The 7/8" diameter thread will fit most original dash board holes. |
|
MOMENTARY START SWITCH
Buy - MS-18
UNIVERSAL
It is heavy enough to use with 12 or 6 volt systems. It can also be used for a horn.
9/16 inch Mounting Hole |
|
MECHANICAL BRAKE SWITCH
Buy - SW-42
FULLY ADJUSTABLE & WATERPROOF
A fully adjustable and water proof mechanical brake switch. Since it's rated for high amps, this switch doesn't require a brake switch relay. It can easily be mounted to most manufacturer's pedal assemblies with the adjustable stainless steel bracket.
5/8 inch mounting hole
*Very Waterproof
*Very Heavy Duty
*Easy Mounting
*Use Anywhere on Pedal
*Fully Adjustable Stainless Steel Bracket
*Intelligent Choice
*Normally On/Push Off
*No Relay Needed if Using w/ Halogen Bulbs
|
|
HYDRAULIC BRAKE SWITCH
Buy - SW-32
LOW PRESSURE
High quality switch. Much longer life than previous models available anywhere. Fits most cars, 20-50 pounds pressure required instead of stock units that don't come on until 60-120 pounds pressure. Standard 1/8 Pipe Thread. It is compatable with Silicon Brake Fluid.
Attention: This updated version of this trusty switch is D.O.T. compliant which includes silicone fluid compatibility and it is capable of 200-300% more cycles. |
|
BRAKE LINE TEE
Buy - BL-25
1/4 INCH BRAKE LINES
For installing SW-32 in new or existing flared brake lines. |
|
BRAKE LINE TEE
Buy - BL-18
3/16 INCH BRAKE LINES
For installing SW-32 in new or existing flared brake lines. |
|
LEVER BRAKE SWITCH
Buy - SW-62
WATER RESISTANT FOR UNDER FLOOR
Water Resistant for under floor.
Normally On. |
|
BUTTON BRAKE SWITCH
Buy - SW-76
UNDER DASHBOARD
Under dashboard switch with plenty of adjustment room.
Normally On.
1/2 inch Mounting Hole. |
|
BRAKE SWITCH
Buy - SW-20
CRUISE COMPATIBLE
For switches requiring an extra circuit for cruise control or torque converter clutch.
1/2 inch Mounting Hole. |
|
BRAKE SWITCH RELAY SYSTEM
Buy - BR-66
Use to increase the life of your brake switch by relieving the high amp draw caused by halogen brake bulbs, more than three brake bulbs or a trailer.
|
|
BRAKE SWITCH RELAY -CRUISE CONTROL
Buy - BR-15
Allows the use of a standard brake switch like our SW-42 or SW-32 to act both as a brake switch and cruise control or torque converter disengagement switch. Eliminates the need for special brake switches or limited locations for the switch. Another RON FRANCIS WIRING quality product.
|
|
TURN SIGNAL SWITCH
Buy - SS-1
TOGGLE
Specially designed by RON FRANCIS WIRING for a simple installation. Controls brake circuit in rear, no extra bulbs required. Complete instructions included. |
|
TURN SIGNAL SWITCH
Buy - SS-7
CLAMP-ON
Installs in existing or new electrical system. Switch includes emergency flasher. Operates using 6 or 12 volts. Use with a three prong flasher if you want to use the indicators on the switch itself.
|
|
TURN SIGNAL WARNING BUZZER
Buy - BA-12
Wired to indicators to produce a loud signal. |
|
TURN SIGNAL SWITCH CONVERTER
Buy - SS-6
Converts a three wire or separate rear turn signal switch into a standard six wire signal switch. |
|
HEADLIGHT SWITCH
Buy - HL-03
This switch includes dome light or interior light circuit, headlights, running lights and dimmer for dash lights. There is a built in circuit breaker for headlights. Requires a fused circuit for running, dash and dome lights. Complete diagram of connections, knob and face nut, connector plug and contacts included. This switch is highly recommended over the old universal headlight switches that can't handle modern bulbs safely.
.435 inch Mounting Hole |
|
IGNITION SWITCH
Buy - IS-02
POLISHED CHROME FACED
Polished chrome face which includes common plastic plug and terminals.All of our switches have acc-off-igntion-start.
1 inch Mounting Hole |
|
IGNITION SWITCH
Buy - IS-01
UNIVERSAL
Universal model with screw terminals and start position.All of our switches have acc-off-igntion-start.
3/4 inch Mounting Hole |
|
DIMMER SWITCH
Buy - DS-02
UNIVERSAL FLOOR MODEL
|
|
WATERPROOF PUSH BUTTON SWITCH
Buy - ED-41
GREAT FOR ELECTRIC LATCHES
5/8 inch Mounting Hole
|
|
TOGGLE SWITCH
Buy - TG-100
HEAVY DUTY SPST ON-OFF
Features Die Cast Housings, 35 Amp rating, extra high quality. Requires a 7/16 inch diameter hole.
15/32 inch Mounting Hole
TG-100 - Simple On-Off
TG-101 - For operating two items like hi and low speed, etc.
TG-102 - Momentary for windows, line locks, power seats, trunks, antennas
TG-103 - Like a dimmer switch, no off
|
|
TOGGLE SWITCH
Buy - TG-101
HEAVY DUTY SPDT ON-OFF-ON
Features Die Cast Housings, 35 Amp rating, extra high quality. Requires a 7/16 inch diameter hole.
15/32 inch Mounting Hole
TG-100 - Simple On-Off
TG-101 - For operating two items like hi and low speed, etc.
TG-102 - Momentary for windows, line locks, power seats, trunks, antennas
TG-103 - Like a dimmer switch, no off
|
|
TOGGLE SWITCH
Buy - TG-102
HEAVY DUTY SPDT ON-OFF-ON MOMENTARY
Features Die Cast Housings, 35 Amp rating, extra high quality. Requires a 7/16 inch diameter hole.
15/32 inch Mounting Hole
TG-100 - Simple On-Off
TG-101 - For operating two items like hi and low speed, etc.
TG-102 - Momentary for windows, line locks, power seats, trunks, antennas
TG-103 - Like a dimmer switch, no off
|
|
TOGGLE SWITCH
Buy - TG-103
HEAVY DUTY SPST ON-ON
Features Die Cast Housings, 35 Amp rating, extra high quality. Requires a 7/16 inch diameter hole.
15/32 inch Mounting Hole
TG-100 - Simple On-Off
TG-101 - For operating two items like hi and low speed, etc.
TG-102 - Momentary for windows, line locks, power seats, trunks, antennas
TG-103 - Like a dimmer switch, no off
|
|
DOOR JAMB SWITCH
Buy - DJ-16
UNIVERSAL FOR FIBERGLASS VEHICLES
Universal switch made with two contacts for use in fiberglass cars or vehicles who need to run ground wire to ensure the connection.
23/32 inch Mounting Hole |
|
DOOR JAMB SWITCH
Buy - DJ-23
FORD REPLACEMENT
Replacement switch for Ford applications. If your switch looks close to this it should be the right one.
29/32 inch Mounting Hole |
|
DOOR JAMB SWITCH
Buy - DJ-24
GM STYLE UNIVERSAL FOR METAL BODIES
GM style switches also for universal application on metal bodies only. The self tapping thread will work well and the exposed shaft will adjust to the door jamb thickness when you close the door the first time. The button end will collapse to the thickness of the button itself.
11/32 inch Mounting Hole |
|
BRAKE SWITCH RELAY
Buy - BR-66
This brake switch relay is used to increase the life of your brake switch by relieving the high amp draw caused by halogen brake bulbs, more than three brake bulbs or a trailer.
|
|
TURN SIGNAL SWITCH
Buy - SS-3-R
PUSH BUTTON - Red w/ White
Push for on and switch lights up and flashes to serve as indicator. Push to shut off. Push both for emegency flashers. Special GLOW feature makes them easy to find in the dark. Complete set-up with two switches, flasher and instructions for easy installation.
Special Note: For cars with cowl or single filament bulbs up front, an extra circuit is provided to flash this bulb similar to the brake/turn in the back allowing the single filament to do a dual purpose.
Each fits 7/8 by 3/4 rectangular hole. |
|
TURN SIGNAL SWITCH
Buy - SS-3-G
PUSH BUTTON - Green w/ White
Push for on and switch lights up and flashes to serve as indicator. Push to shut off. Push both for emegency flashers. Special GLOW feature makes them easy to find in the dark. Complete set-up with two switches, flasher and instructions for easy installation.
Special Note: For cars with cowl or single filament bulbs up front, an extra circuit is provided to flash this bulb similar to the brake/turn in the back allowing the single filament to do a dual purpose.
Each fits 7/8 by 3/4 rectangular hole. |
|
TURN SIGNAL SWITCH
Buy - SS-3-A
PUSH BUTTON - Amber w/ Black
Push for on and switch lights up and flashes to serve as indicator. Push to shut off. Push both for emegency flashers. Special GLOW feature makes them easy to find in the dark. Complete set-up with two switches, flasher and instructions for easy installation.
Special Note: For cars with cowl or single filament bulbs up front, an extra circuit is provided to flash this bulb similar to the brake/turn in the back allowing the single filament to do a dual purpose.
Each fits 7/8 by 3/4 rectangular hole. |
|
TURN SIGNAL SWITCH
Buy - SS-3-B
PUSH BUTTON - Blue w/ White
Push for on and switch lights up and flashes to serve as indicator. Push to shut off. Push both for emegency flashers. Special GLOW feature makes them easy to find in the dark. Complete set-up with two switches, flasher and instructions for easy installation.
Special Note: For cars with cowl or single filament bulbs up front, an extra circuit is provided to flash this bulb similar to the brake/turn in the back allowing the single filament to do a dual purpose.
Each fits 7/8 by 3/4 rectangular hole. |
|
TURN SIGNAL SWITCH
Buy - SS-3-W
PUSH BUTTON - White w/ Black
Push for on and switch lights up and flashes to serve as indicator. Push to shut off. Push both for emegency flashers. Special GLOW feature makes them easy to find in the dark. Complete set-up with two switches, flasher and instructions for easy installation.
Special Note: For cars with cowl or single filament bulbs up front, an extra circuit is provided to flash this bulb similar to the brake/turn in the back allowing the single filament to do a dual purpose.
Each fits 7/8 by 3/4 rectangular hole. |
|
ACCESSORY SWITCH
Buy - PS-20
PUSH-PULL HEAVY DUTY - w/o Knob
Simple heavy duty on/off capable of 20 amps. Great switch for most accessories!
1/2 inch Mounting Hole |
|
ACCESSORY SWITCH
Buy - PS-32
PUSH-PULL HEAVY DUTY - w/ Knob
Simple heavy duty on/off capable of 20 amps. Great switch for most accessories!
1/2 inch Mounting Hole |
|
HEATER SWITCH
Buy - HS-1
PUSH-PULL - w/o Knob
Push-pull type knob with 3 positions: Low, High and Off
7/16 inch Mounting Hole |
|
HEATER SWITCH
Buy - HS-31
PUSH-PULL - w/ Knob & Accent Rings
Push-pull type knob with 3 positions: Low, High and Off
7/16 inch Mounting Hole |
|
WIPER SWITCH
Buy - WS-1
2 SPEED - w/o Knob
Converts simple Street Rod wiper motors to two speeds. Does not work with Might Wiper brand motors.
7/16 inch Mounting Hole |
|
WIPER SWITCH
Buy - WS-31
2 SPEED - w/ Knob & Accent Rings
Converts simple Street Rod wiper motors to two speeds. Does not work with Might Wiper brand motors.
7/16 inch Mounting Hole |
