|Mick Peppmeier in Sherwood, Oregon|
|While pondering the wiring for my next build project, 1960 F-100 with an HO 5.0 Ford, it occurred to me that your MK-97 wiring harness for my ’53 F-100 has been the highlight of that build and has drawn the most attention at the shows I have attended. Granted, these are for the most part small local outings but I did drive it from Oregon to the Heartland Nationals in Iowa and back for a trip of over 4000 miles. 22-26 mpg. I now have over 10,000 miles on the truck and have had ZERO issues. I have absolutely no concerns about getting in the ’53 and going anywhere. We are planning the next summers event to St. Paul Minnesota for the Back to The 50’s event. That will be another 3600 mile trip that I will be looking forward to.
Just thought I would let you know how pleased I have been with your product and the help you provided. You helped make last summer a memorable year for me.
|“Owning a hot rod restoration company requires us to use the best
products on the market and we feel that Ron Francis has solved all of
our wiring needs from the fuse block to the wiring kits. As a builder
of prestigious hot rods and muscle cars, not just any wiring company
will do. RON FRANCIS WIRING products reflect the high-end performance
and ease of installation we expect from a product not to mention
their customer service is unmatched.”
Fesler Built - Scottsdale, Arizona
Fesler, Inc. is an Authorized Dealer of Ron Francis Wiring products.
Visit their new shop in Scottsdale, Arizona!|
|Steve & Nan Glover -|
|Steve Glover of West Virginia is building a “Cancer Awareness Truck” for his wife Nan. The truck will have a white bench seat trimmed in a pink ribbon design. The exterior will feature a pink ribbon wave running around the truck from just under the windows and ending with a small pink rose in the center of the hood just below the windshield. There is too much to say here, so please go to http://wvgoldenoldies.com/Rose/ to learn more about this special project which is using Ron Francis Wiring products to make it run. Steve, keep us posted on your progress and we can’t wait to see “Rose” on the road! You and Nan are in our prayers, as are all your generous friends who are helping with this project.
Update: 10-09: Bob
It was great talking to you today! Thanks for your assistance on helping me select the right wiring kit for my newest project.
We did finish the Cancer truck ('41 ford flathead) last summer, and my wife actually got to drive it out of the garage, and a little in the next couple of months before she past last November 20. I also still have the '34 Chevy sedan both of which are outfitted with Ron Francis Wiring Express kits.|
|Hi Ron and Connie!
I just wanted to drop you a quick note of thanks and to let you know
that I had absolutely no problems installing the wiring kit in my
1935 Ford Pickup/Hotrod. The instructions were clear, easy to follow,
and accurate, and after wiring the last headlight and blinker, when I
plugged in the battery, EVERYTHING WORKED!!! It started, the lights
lit, the blinkers blinked, the horn beeped. Woohooo!!!
I also installed your grounding kit, and with only a few trial
startups to check out the new electric cooling fans and other systems
I installed along the way, I can categorically state that the beast
never started as easily as it does now. In tearing out the old wiring
system I found numerous places where grounds were made poorly, and in
some cases, where I wondered why things ever worked at all. With the
grounding kit I know that every accessory will work every time.
I inherited my truck from my father and had always had a dozen
gremlins plaguing it that no amount of troubleshooting was able to
remedy. In a fit of frustration last year I just yanked out all the
old wiring harness and decided to start from scratch. I chose your
products after browsing the web sites of half dozen companies
offering wiring kits. Your site offered some of the most complete
information and best descriptions of your products, and made me feel
like maybe this was something I could do myself.
I still have a ways to go with the rest of the interior work before I
can get it back on the road, but I am now confident that it will
happen sooner than later.
Thank you so much for such a well thought out product!
Eric Hawley, Shaw Island, WA|
|Repeat Customer, Ron Arant, from Washington State sent us a photo of
this ‘33 Franklin he had just finished, and told us about the “truck
that Dodge never made” - and here it is! The Franklin is now owned by
Allen and Donna Thomas in California. You can check out Ron’s other
‘phantom creation’ - a Diamond ‘T’ Woodie on the inside front cover
of this catalog. Ron - thank you for being a loyal customer, and keep
those photos coming! This is what Ron says about our products:
Connie, Hi! Here are some pictures of my latest project with your
wiring as usual. I have used your wiring for about 15 years now, its
great! I tell people if you can get your pants on by yourself in the
morning you can wire your own car, if you follow the directions to
the letter. Thanks again for a great product. I am now building a
‘28 Dodge pickup with your wiring. Thanks again, Ron Arant|
Check out my ’37 Dodge 2 Door sedan. It has your Express Wiring
System plus the Torque Converter Lock-Up Kit, Cruise Control, and
extra long battery cables you supply. I couldn’t be happier with how
the car turned out and your stuff was fabulous. Easy to follow
instructions and top of the line quality on everything. My next
project, just getting underway, is a ’37 Ford and you can rest
assured you will get a call from me to order all my wiring needs.
Dick Shaw, Albuquerque, NM|
I recently bought a Bare Bonz (BB-695) Kit from you. The kit was for
a 1974 VW Thing that I am restoring. With my son’s help, we rewired
the Thing. Your kit was so easy! The instructions were so clear and
precise it made the job so easy. I would not hesitate to recommend
your products to my VW friends. We had to call your tech people a few
times. They were very knowledgeable and very friendly. They were a
great help. Thanks again,
Ken Joffrion, Clinton, LA|
|Ron, I have received the RR-33 replacement sockets and bulbs and
everything works great! I want to thank you for the professional
manner in which you helped me resolve my problem, it was
appreciated. In the past I've had two bad experiences with items I
ordered, won't mention names but both sent defective products, I
returned the items, they acknowledged the problems but it took
several weeks to finally get it resolved. At that time the
individuals I dealt with were rude and not helpful, and that
certainly wasn't my experience with Ron Francis Wiring. I'm a charter
member of our car club, 20th Century Chevy, Inc., we're listed in the
NSRA Fellow Pages. Our membership is around 60, mostly street
rodders, we associate with most of the guys at E'Ville Iron (Frog
Follies) and through our annual Carfest & Cruiz-In we meet hundreds
of other car guys. Ron Francis Wiring will receive my highest
endorsement and recommendation when discussions turn to electrical
products, best advertising a company can have! I will be a returning
Thanks Ron! If I happen to see you at Louisville I'll stop
and say Hi! - Mike McLemore, Washington, IN|
|California Collector Cars|
We decided from the very beginning of our restoration project we were
going to put together one heck of a beautiful Camaro. We wanted the
best possible components going in to the car; named “REDEMPTION”,
from the engine to the exhaust, nothing was overlooked. One of the
most important aspects of any classic car restoration project is the
wiring system; this is why we chose Ron Francis’s Custom Wire
harness--GM POWERED EXPRESS WIRING kit; includes from the fuse panel,
five point ground kit, master disconnect to every electrical
component throughout the entire car. The kit was complete with
everything we needed and it had very good instructions included—
making for a simple installation. There is nothing better then
knowing you don’t have to worry about bad wiring; we know we
installed the absolute best wiring system.
Thank you, Ron Francis for providing us with the best.
|Ron, First of all, I want to compliment the friendly and proficient
service I received in dealing with your staff. I am restoring a 1955
Willys station wagon and ordered an express wiring system. It was a
pleasurable experience, unlike the contact that I have had with some
of your competitors. I noticed in your catalog that you also own a
Willys wagon. Any input or recommendations would be greatly
appreciated. Thanks, Arve Wells, Thousand Oaks, CA
P.S. Once again, I am extremely impressed with your company's
responsiveness - Keep up the great work !|